Xephius
03-04-2009, 03:45 PM
Can I spray Urethane PPG paint on top of the Duplicolor Primer, or do I need to sand it down and use a PPG primer? I am concerned about the primer lifting or bubbling.
Second, will I be able to lay down HOK Urethane Acrylic flames on top of Paintshop Jet Black base coat, then shoot Paintshop clear on top of all of it. My airbrush artist is very concerned that his HOK paint will lift and bubble the Paintshop Lacquer paint, and that the clear will not adhere to the HOK flames.
If you suspect problems with this combo, I will shoot come Urethane for the flame job and use the Duplicolor when shooting straight color on my other bike. Thanks in advance.
-X
Second, will I be able to lay down HOK Urethane Acrylic flames on top of Paintshop Jet Black base coat, then shoot Paintshop clear on top of all of it. My airbrush artist is very concerned that his HOK paint will lift and bubble the Paintshop Lacquer paint, and that the clear will not adhere to the HOK flames.
If you suspect problems with this combo, I will shoot come Urethane for the flame job and use the Duplicolor when shooting straight color on my other bike. Thanks in advance.
-X