Lip spoiler

[Rusty]

Im looking to paint a urethane(Ithink) spoiler on my car from red to a dark grey graphite. What is the proper prep procedure and primer needed. Also I am doing this myself with rattle cans, What product do I need to use as I am told I have to use some type of flex additive.

[Dupli-Color-Specialist]

Im looking to paint a urethane(Ithink) spoiler on my car from red to a dark grey graphite. What is the proper prep procedure and primer needed. Also I am doing this myself with rattle cans, What product do I need to use as I am told I have to use some type of flex additive.

If you are handling this job with aerosols then you cannot add a flex additive. A flex additive can only be added if using bulk paints. Depending on how much this spoiler is going to flex you will be ok because all paints have some sort of flexibility.

1. Degrease the surface with Prep Spray PS100 or a quality Grease and Wax remover.
2. Scuff the surface and feather sand smooth with 600-800 grit
3. Degrease
4. Prime with CP199 Adhesion Promoter
5. Prime with FP101 Filler Primer
6. Color coat
7. Clear coat