Grabber Orange

[GoGt4ME]

Hi all I am a Virgin ;) anyway I have a 08 Grabber Orange GT Mustang and have bought a power wheel mustang. It Is red and is plastic. I need Grabber Orange paint and primer & what would I need to do this job. I will send a few pic of powerwheel. Thanks

http://i44.photobucket.com/albums/f42/savedareyou/scuffclean1.jpg


http://i44.photobucket.com/albums/f42/savedareyou/scuffclean6.jpg


picture of GO stang

http://i44.photobucket.com/albums/f42/savedareyou/TOPDOWN.jpg

hope this works

[GoGt4ME]

Anyone out there :D

[chriss68]

this info is from the dupli-color specialist on the steps to painting plastics.
as far as the grabber orange, i dont think there is any for the Paint shop system. there is a hugger orange, but it isnt quit the same as the color of your mustang.

Bare Plastic Application:

1. Wipe down the area to be painted with our PS100 prepspray

2. Lightly scuff down the area with a red scotch brite pad

3. Wipe down area again with PS100

4. Apply a light coat of CP199 Adhesion Promoter

5. Apply our filler primer FP101 to help fill in any imperfections

6. Wet sand the primer with 800-1000 grit paper to smooth out and imperfections.

7. Wipe down area again with PS100

8. Apply your color coat

9. Apply your clear coat

Previously Painted Plastic.

Everything will be the same except leave out step 4.

Always follow the directions on the back of each can before use.

[Dupli-Color-Specialist]

Thanks Chris, Saves me a lot of typing.

If the body of the Power Wheels is very flexible you will want to contact your local Sherwin Williams Automotive store and ask about what flex agent to use with the Paint Sho System. Make sure you mention that is a lacquer based paint. Thanks

[GoGt4ME]

Hey thanks for your Quick response :) Very helpful:D